RG-O-flame

Razor Griddle is here for you

When You Need Us Most

Razor Griddles are easy to transport, set up, heat, use, clean, and store. But if you need support, safety tips, places to buy, or general (griddling) advice, we're here to help.

FAQ

  • Check to see if the LP gas tank valve is closed. If so, make sure the regulator is securely attached to the LP gas tank (check the “Installing LP Gas Tank” section in manual for how-to) then turn LP gas tank valve to “OPEN”.
  • Check to see if the LP gas tank is low or empty. If so, refill LP gas tank. Use “Checking for Leaks” section in manual if concerned about tank.
  • Check to see if the wires or electrodes are covered with cooking residue. If so, clean wire and/or electrodes with rubbing alcohol.
  • Check to see if the electrode and burners are wet. If so, wipe dry with a clean cloth.
  • Check to see if the electrode is cracked or broken (indicated by spark). If so, call customer care for a replacement part at 1.800.694.0013
  • Check to see if a wire is loose or disconnected. If so, reconnect wire or call customer care for assistance.
  • Check to see if there is an obstruction of gas flow. If so, clear the buner/ventri tube and check for a bend or kink in the hose.

Check to make sure the overfilling prevention device hasn’t activated. If so, follow these steps.

  1. Turn control knobs to “ OFF”
  2. Wait 30 seconds and light griddle
  3. If flames are still too low, reset the overfilling prevention device:
  4. Turn control knob(s) “ OFF”
  5. Turn LP gas tank valve to “CLOSED”
  6. Disconnect regulator
  7. Turn control knobs to  and  (HIGH)
  8. Wait 1 minute
  9. Turn control knobs to “ OFF”
  10. Reconnect regulator and leak check connections, being careful not to fully open valve
  11. Light griddle per “Lighting” section

Check to see if the burner ports are clogged or blocked. If so, clean the burner ports with a dry cloth and rubbing alcohol.

New burner may have residual manufacturing oils. To fix, burn the griddle for 15 minutes on high with the lid closed.

  • Check to see if there is a grease  build-up. If so, remove and clean clean all griddle parts by referencing the “cleaning and care” section of the manual. 
  • Check to see if there is excessive fat in the meat you are preparing. If so, trim fat from meat prior to cooking.

The cooking surface is steel and depending on your specific use frequency and environment, it’s possible and normal if the surface rusts. Reference the “Refurbish the Griddle Surface” section of the manual to see care instructions and you’ll be cooking again in no time.

Refer to the “Seasoning Griddle” section of the manual to learn how to keep the surface seasoned or click here to watch our how-to video.

Check to see if one of the burners has become obstructed, causing the other to work harder and become hotter. After cleaning, if problem persists, call 1.800.694.0013 for assistance.

We recommend the following oils for seasoning purposes: olive oil, vegetable oil, canola oil, coconut oil, flax seed oil and sesame oil. Lard can also be used to season the griddle top.

Depending on the model, the time may vary but typically around 30 minutes for most models. Assembly is designed to be clear and simple, larger models we recommend two people due to the weight of the units.

Razor Griddles are highly versatile and remain the most portable griddles on the market with several unique features like folding shelves that cover the cook surface, an entirely collapsible cart system, and front-facing grease cups. With 5 models to choose from based on your cooking style, it’s no wonder Razor Griddle is the griddle of choice.

Warranty

Not sure where you stored the warranty that came with your Razor Griddle? No problem. You can download it here.

Manual

Need to consult the manual for your Razor Griddle? No need to go searching the garage. You can download it here.

newsletter-icon

Don’t see the answer to your question here?

Please email service@revoace.com